| Moderated by: chrisbet, |
|
|
| Monochrom Leica18Mp Rangefinder | Rating: 
|
| Author | Post |
|---|
| Posted by Robert: Sat May 12th, 2012 04:22 | 1st Post |
| This is nice, at a price... http://www.dpreview.com/news/2012/05/10/Leica-announces-M-Monochrom-18MP-Full-Frame-Mono-Rangefinder
____________________ Robert. |
| Posted by jk: Sat May 12th, 2012 07:07 | 2nd Post |
| Why ? Why not make a camera that does colour and B&W just like the Fuji XPro1 ?. This $8000 is an insane price for a camera that has so many limitations and the price is for the body only. The only Leica that I would lust after is the Leica S2. It is superb but still horribly expensive.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by Robert: Sat May 12th, 2012 07:30 | 3rd Post |
jk wrote:Why ? Because using the triple filters required for colour is not optimal for monochrome. This sensor is designed specifically for monochrome, the output should be superb, provided all you want is monochrome and you are prepared to sink that sort of money into a specialised body. I do know of people who have taken new D3's and converted them to IR so it's not that different?
____________________ Robert. |
| Posted by jk: Sat May 12th, 2012 09:10 | 4th Post |
| Yes I understood that removing the filters makes for a sharper and monochrome image but I do think that it is a strange to go for a full monochrome camera. Converting a camera to IR use is fine as that is a decision on a one off basis not a whole production run.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by Robert: Sat May 12th, 2012 09:30 | 5th Post |
jk wrote:Yes I understood that removing the filters makes for a sharper and monochrome image but I do think that it is a strange to go for a full monochrome camera. I suspect diehard Leica owners brains are wired differently from ours...
____________________ Robert. |
| Posted by Squarerigger: Sat May 12th, 2012 10:28 | 6th Post |
That's a lot of money for what used to be taken care of by inexpensive bulk b&w film using the same camera I could also use color film in. I think the world has gone mad!!
____________________ -------------------------------------------- Gary |
| Posted by jk: Sat May 12th, 2012 17:14 | 7th Post |
Robert wrote: jk wrote:  To each his own. I dont begrudge anyone who wants and can afford one actually getting one. Leica have great ideas and fine execution but at the wrong price for the mass market.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by Doug: Sun May 13th, 2012 00:20 | 8th Post |
jk wrote:Why ? I'm surprised you don't want one Without bayer pattern filters a sensor is incapable of colour, but the red green and blue filters of the bayer filter absorb two thirds of the light which might be available to each pixel. Surely removing these filters would translate to significantly better images than those which might be converted to b&w from a standard M9 jk wrote: I dont begrudge anyone who wants and can afford one actually getting one. 1 out of 2 aint bad
____________________ Recent & Popular posts ProCapture | Genius on Demand Blog |
| Posted by Ray Ninness: Sun May 13th, 2012 11:28 | 9th Post |
| Oh oh I want one, now if I can just find my credit card???? Hopefully by the time I find the credit card, I will have come to my senses!!!! Only Leica would come up with something like that and for sure at a price like that!!!
____________________ Ray Ninness F8Photos.com Bedford, New Hampshire USA |
| Posted by jk: Sun May 13th, 2012 18:20 | 10th Post |
| You dont really Ray. How will you make colour?. An M9 would be so much better.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by Ray Ninness: Sun May 13th, 2012 22:09 | 11th Post |
jk wrote: You dont really Ray. How will you make colour?.Surely you realize I was jesting!!! I haven't bought an M9 not so much because the price is insane, but be cause I felt the camera wasn't capable of doing what I thought it should.. At those prices there should be no compromising, it should do everything you ask or need, and give you change for your dollar too!! :makemyday:
____________________ Ray Ninness F8Photos.com Bedford, New Hampshire USA |
| Posted by jk: Mon May 14th, 2012 18:00 | 12th Post |
| I thought that the reason why you werent here so much was because you were moonlighting in Japan again to get enough to buy the Leica.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by amazing50: Tue May 15th, 2012 07:36 | 13th Post |
| Some Leicas are a good investment. http://news.yahoo.com/blogs/technology-blog/2-8-million-leica-world-most-expensive-camera-202354222.html
____________________ There is nothing worse than a sharp image of a fuzzy concept ;~) Mike Grace |
| Posted by Ray Ninness: Tue May 15th, 2012 09:51 | 14th Post |
jk wrote: I thought that the reason why you werent here so much was because you were moonlighting in Japan again to get enough to buy the Leica. I'd love to go back to japan, but not to work there, that was one of the craziest stints I ever did.. Of course the pay was outrageous, but so was 9-9, 7 days a week!! Mostly my time lately is spent playing at Armature radio, and that is a huge time suck. Then I spent two months searching for old negatives and scanning and Photoshopping files and identifying everything!!! And I am getting too old to spend 10-15 hours a day behind the keyboard.. As the Honda commercial says "I wan'ah Ride" Now if the rain stops long enough I may get my bikes on the road??? Then there is working out at the health club, roller skating, house work, and of course play time!! I just bought a Mig Welder, and I need practice time with that now too  If it ain't one things it's another.. 
____________________ Ray Ninness F8Photos.com Bedford, New Hampshire USA |
| Posted by jk: Tue May 15th, 2012 13:08 | 15th Post |
| I got a Mig welder last year as I got it in a job lot of kit. I still havent used it but it is brand new and still boxed. I'm sure I'll have a need for it sometime!
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by Ray Ninness: Tue May 15th, 2012 18:38 | 16th Post |
jk wrote: I got a Mig welder last year as I got it in a job lot of kit. I still havent used it but it is brand new and still boxed. I'm sure I'll have a need for it sometime!I'll have to relearn, the last time I used one was probably in 2003 at work. I ordered the equipment for the shop, and played a bit with the tools.. But when I did any welding, I would just ask one of the guys in the shop, How to set the machine to weld this??? I have no one to ask now :-O So I have been reading and making sparks, and back to reading !!! My wife is worried that I'll burn the garage down !!! 
____________________ Ray Ninness F8Photos.com Bedford, New Hampshire USA |
| Posted by Robert: Tue May 15th, 2012 19:19 | 17th Post |
| If the wire stubs the job, turn up the volts or turn down the wire speed (current), if you are burning holes, move faster or turn down the wire or the volts. If you have the settings right, there should be an even, harsh crackle from the ark. Adjust the volts higher for thicker metal, down for thinner metal. The wire speed (current) is more a fine tuning to adjust for technique and job variations like vertical and overhead. For better penetration push the torch forwards along the weld, to weld thin difficult joints pull the torch backwards along the weld. Gas wise, turn down the flow until the weld starts to become bubbly, then turn up the flow until it's clean but no higher. Any other welding problems, just ask! Oh, and use .8mm wire for 95% of jobs. .6 burns too fast without making enough heat, 1mm is too heavy unless you are welding 1/2" metal. !.2mm and 1.6mm wire needs a heavy 350 Amp set using spray transfer, which is a whole different game. Oh, just remembered, Use a heavy glove on your left hand to hold the nozzle end of the torch, to steady it, that makes all the difference to controlling the weld. An automatic helmet is also a great help.
____________________ Robert. |
| Posted by KenRay: Wed May 16th, 2012 00:27 | 18th Post |
| Have never used a wire welder so can be of no help. My Grandson is an expert however and his Father is no slouch. The closest I ever came to it was Heli-Arc welding in the 60's. Used a Tungsten electrode and helium as the gas but filler rod was by hand. We used it to weld up tire molds. I was a supervisor but played with it till I actually became pretty good. Almost all welding was on Aluminum molds.
____________________ Kenneth Ray |
| Posted by jk: Wed May 16th, 2012 03:24 | 19th Post |
| Thanks Robert. Good to know I can phone for advice when I get stuck.
____________________ Still learning after all these years! https://nikondslr.uk/gallery_view.php?user=2&folderid=none |
| Posted by TomOC: Wed May 16th, 2012 13:48 | 20th Post |
| Taking off filters does have an impact. The fuji xp1 eliminates one of the main filters that is on all of our dslr's and it's really really sharp. Still... How sharp is sharp and at what point do you just emphasize the small amounts of dust on the sensor rather than the image??? I'll hold off till I see some Leica results - they usually do impressive stuff - but I have a hard time thinking that shooting raw and converting to BW isn't the ideal way for us to stay Tom
____________________ Tom O'Connell -Lots of people talk to animals.... Not very many listen, though.... That's the problem. Benjamin Hoff, The Tao of Pooh |
| This is topic ID = 144 | ||
| Nikon DSLR Forums > Camera and Lens Forums > Other Makes of Camera > Monochrom Leica | Top | |
Users viewing this topic |
||
Current theme is Blue
| A small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondsl.uk Thank you. |
Hosted by Octarine Services
UltraBB 1.173 Copyright © 2008-2024 Data 1 Systems
Page processed in 0.0661 seconds (67% database + 33% PHP). 140 queries executed.
UltraBB 1.173 Copyright © 2008-2024 Data 1 Systems
Page processed in 0.0661 seconds (67% database + 33% PHP). 140 queries executed.