Nikon DSLR Forums Home 

This site requires new users to accept that a small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondslr.uk after requesting a new account. Thank you.

 Moderated by: chrisbet,  
AuthorPost
chrisbet



Joined: Fri Feb 8th, 2019
Location: Leigh On Sea, Essex , United Kingdom
Posts: 1422
Status: 
Offline
I picked up one of these lenses very reasonably as the zoom was jammed at 35mm - turned out to be nothing more than a missing screw and stripped thread in the zoom key - easily fixed. However the service manual is laced with warnings not to disassemble the 1st or 5 lens group unless you have the equipment to check and realign the optical axis... so left well alone! However the does seem to be a fair amount of dust inside, evenly spread over at least one of the lens groups.

It doesn't seem to affect the images taken with the lens but I would like an opinion from you -



Click here to comment on this image.



Click here to comment on this image.

jk



Joined: Mon Apr 2nd, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6874
Status: 
Offline
Cant see any trees or has the scaffold tower moved?

Images look OK to me.

chrisbet



Joined: Fri Feb 8th, 2019
Location: Leigh On Sea, Essex , United Kingdom
Posts: 1422
Status: 
Offline
The trees at the bottom of the garden are down - now it is time to climb up on the roof to repair the roof tile damage caused by the spring storms. Then it will be a repaint of the timber cladding, the south side of the house is very exposed to the weather. So much to do!

As it happens I found that the front lens group can be removed as a group without disturbing the adjustment screws which hold the front glass in a floating frame. The dust was evenly coated over the front of the second group so that was easily cleaned with a brush and a puff!  So now the lens look pretty clean inside. :-)

jk



Joined: Mon Apr 2nd, 2012
Location: Carthew, Cornwall, United Kingdom
Posts: 6874
Status: 
Offline
Well done.  That is another job off the list.

So with all this sunny weather the moss and fungus detritus will be killed off so the repainting work should be easier.

chrisbet



Joined: Fri Feb 8th, 2019
Location: Leigh On Sea, Essex , United Kingdom
Posts: 1422
Status: 
Offline
I bought the lens to fix and sell on but I am becoming quite fond of it! The 610 has auto crop so the DX lens works fine albeit at 10mp but the lens is so much lighter and less bulky than the 28-70 2.8! Maybe I'll put it up for sale at a premium price and not be too disappointed if it doesn't sell!

The wood cladding on the house has Ronseal stain on it - this flakes off over about 5 years (2017 was the last time I did it)  so all I need to do is run the belt sander over it to remove the flaky stain and then put on another couple of coats.


Current theme is Blue



A small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondsl.uk Thank you.


Hosted by Octarine Services

UltraBB 1.173 Copyright © 2008-2024 Data 1 Systems
Page processed in 0.0314 seconds (65% database + 35% PHP). 56 queries executed.