 |
| |
| This site requires new users to accept that a small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondslr.uk after requesting a new account. Thank you. |
| Moderated by: chrisbet, | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
jk
|
New version of the firmware (v3.12) for Z7 and Z6 that replaces the buggy previous versions. I have installed it and it seems OK. |
|||||||||
jk
|
The changes...... Changes from “C†Firmware Version 3.11 to 3.12 • Fixed an issue with firmware versions 3.10 and 3.11 in which fine-tuning values selected for AF fine-tune > Saved value were not correctly applied when pictures were taken. Changes from Previous Versions Changes from “C†Firmware Version 3.10 to 3.11 • Fixed an issue that occurred when the camera was used with an MB-N10 battery pack with two batteries installed and an EN-EL15 or EN-EL15a in Chamber A, namely that the camera would sometimes fail to switch to the battery in Chamber B when the battery in Chamber A was exhausted. Changes from “C†Firmware Version 3.00 to 3.10 • Added support for Nikon Z mount TC-1.4x/TC-2.0x teleconverters. • Added support for F mount lens firmware updates. F mount lens firmware updates are supported from FTZ mount adapter firmware version 1.10. • Changed some of the f/-number values displayed when exposure is adjusted in steps of 1/3 EV (f/1.2 is now displayed as f/1.3). As of July 21, 2020, this applies to NIKKOR Z 58mm f/0.95 S Noct lenses. • The bracketing increment is now properly applied to photos taken with exposure locked during AE bracketing in Continuous H (extended) release mode. • When an external recorder compliant with Atomos Open protocol is connected, movie recording can now be started and stopped using camera controls if all the following conditions are met: - The camera is in movie mode and the recorder is connected via HDMI. - A memory card is inserted. - The following are selected for HDMI > Advanced in the SETUP MENU: ▹ External recording control > On ▹ Output data depth > 10 bit ▹ N-log setting > Off - 3840x2160; 30p/25p/24p is selected for Frame size/frame rate in the MOVIE SHOOTING MENU. • Fixed the following issues: - The camera monitor would exhibit a green cast when the camera was connected to an external display via HDMI if: ▹ Adobe RGB was selected for Color space in the PHOTO SHOOTING MENU, ▹ Shutter-release button > Record movies was selected for Custom Setting g2 (Custom control assignment) in Group “g†(Movie) of the CUSTOM SETTING MENU, ▹ 10 bit was selected for HDMI > Advanced > Output data depth in the SETUP MENU, ▹ On (cannot record to card) was selected for HDMI > Advanced > N-Log setting in the SETUP MENU, ▹ On was selected for HDMI > Advanced > View assist in the SETUP MENU, and ▹ movie mode was selected with the photo/movie selector. - The crop selected for “tall†(portrait-orientation) pictures using PictBridge would not be accurately reflected in the printed image. - In rare circumstances, autofocus would not engage if a NIKKOR Z DX 16–50mm f/3.5–6.3 VR lens was extended at the same time the camera was turned on. |
|||||||||
Current theme is Blue
| A small amount of member data is captured and held in an attempt to reduce spammers and to manage users. This site also uses cookies to ensure ease of use. In order to comply with new DPR regulations you are required to agree/disagree with this process. If you do not agree then please email the Admins using info@nikondsl.uk Thank you. |